Friday 25 July 2008

Converting an image into a 3d cutting pattern in psp.

Now I know loads of peeps arent using scal for much more than cutting fonts... tut tut... wicked waste.
So here goes how I use psp to convert a coloured image into a pattern ready for inkscape to trace & SCAL to cut. It isnt the quickest but it's possibly the easiest for people who arent too familiar with psp.




Here's the pic I found online of a guitar.



Open the image in PSP, then go to layers/duplicate

Click on the layer visibility on the layer named background. You'll get a red cross showing as in the pic but you wont notice any difference to the picture.


Chose your magic wand tool, mine is on the side menu bar. Click on the white area around the guitar.


You'll have little flashing dashes to show that you've selected the white areas.


Hit the delete button and all of the white will disappear leaving you with a chequered background.


You now need to make 2 more duplicate layers again. To make it easier to work with I like to name my layers. You do this by right clicking on the layer and chosing rename.

Being totally original I called mine top middle & bottom.

Because this image it too small to have 3 identical images side by side you need to change the canvas size.


DONT resize the image, as that makes the image larger but doesnt give you any room to play.



Select the move tool and use it to move your 3 images so they are all next to each other. You might notice that as you move each layer it highlights where you named each layer. This is an important feature and you need to make sure as you are working on a layer that it's actually highlighting the right one.




Make sure the top layer is highlighted and select the selection tool (the box shaped one)



Use the tool to draw a box around the guitar, (doesnt matter if it goes over the next) and click inside. Those dashed lines will appear around the outside.

Select the paintbrush tool



Colour all the way over the guitar, those dashed lines will stop you colouring over the edge so it's perfectly safe to use a large brush and really go for it.

Now for the time consuming bit, we need to rub out all the areas we dont want to cut.
Select your middle layer and zoom right in so you can clearly see the edge. It doesnt matter if you can only see a small section of the image.


Now choose the eraser tool. and very carefully rub out all the bits you dont want. If you accidentally rub out a bit too much just go to edit then click undo. You can undo as many steps as you want.

Eventually your layer will look like this. Using the same method as before draw around with the selection tool, click inside the box then paint over.


You might find a few areas that need to be erased, dont be afraid to change the size or shape of the brush if it makes it easier for you to get into small areas or create a straight line.


Select your top layer and repeat with the eraser
Final time to draw around with the selection tool, click inside then paint over.
You should have an image like this. As it stands it will waste a load of card when it cuts so I use the move tool to drag the shapes closer together.
If like me you use 2 pieces of different card on 1 mat make sure you leave a decent space in between otherwise you'll be fiddling around to get the card in the right spot.
Now all you need to do is save as a jpg. It will warn you that it needs to flatten the image which is fine.

There are quicker ways to get rid of the waste areas but that's for those who have more of a knowledge of the selection & drawing tools. I will try to do a tut on it but not for a few days at least ;o)




Thursday 24 July 2008

3d guitar cut with SCAL



I used DCWV rockstar paper stack with a 3d guitar cut using SCAL. Each string had to be sewn seperately to the bottom bit then attached before sewing them to the handle. A thin strip of peeloff for the frets & a few bits of waste for the knobs. Surprisingly quick to make although it took a while to create the image in PSP. The scut file should be here, use 2 3"*7 pieces of card and have them side by side on the mat if you want to use 2 different colours the way I have.

Friday 18 July 2008

SCAL again

Dont mention B&Q or the door, still not here and they are saying September!!

I've been having fun with SCAL (to keep my mind off of B&Q), this time cutting words into the base card.
Unfortunately the base card is a similar cream to the wallpaper so it doesnt really show the cut areas properly. If you want the scut file for the base card & the overlay it's just here and makes a 5 1/2" card. The flower is just a basic shape from paintshop pro and cut with 1cm difference each time. As always, despite having 1000s of brads I didnt have the right colour so had to dip an orange one into some embossing powder. For once I had the sense to use my long handled crocodile clip to hold while embossing so all fingers are burn free ;o)